Final Year Project Progress Report 17/18 (UNIKL BMI)

PROGRESS REPORT THESIS I proceed to complete the hardcover for my report. The hardcover format is attached in FYP website to be followed by FYP students. For degree's hardcover is dark blue color. I also had manage the forms for submission.  As informed by the FYP committee, we are advise to burn our project documents in a CD which should contains: Picture of the project in .jpg format Poster of presentation in .jpg format Abstract of the report in .txt format Video of the project in .flv format Final report for FYP in .pdf format Besides, all FYP students need to upload their documents in FYP website.

PROGRESS  REPORT THESIS I have done my project report by writing the Abstract for the whole report. The project description has been summarize in the Abstract and the contents is mentioned. A few corrections have been managed after a multiple checks by my supervisor.  I have submit my report to my supervisor to undergo the plagiarism detection. All students need to do a correction if the percent of the plagiarism is exceed 20%. The result for my plagiarism is 8% which don't need to do any correction for my report. The rest time left in this week is used to do some revision for my final exam. I have to make a preparation for my exam which held on next week. Wish me luck for the final exam !!!!!

PRESENTATION DAY The industry day is on 2nd May 2018. All FYP 2 (Degree) and FYP Diploma student will demo and present their project on that day. The vanue is at Dewan Gemilang Hall. The time is from 8.00 a.m until 12 noon. I have done the presentation and demo of my project. The presentation went well. I have been assess by university lecturer, Dr. Zuhanis binti Mansor and industrial staff. There are some commend about my project, i take it to improve my report. I have explained about my project functionality and i have answer the question that my assessor ask. Now i have to focus on completing my thesis about this project. Here are some photo of my presentation during industry day.

COMPLETE PROJECT The servo motor will rotated clockwise when push the button ON that mean the auto gate will open also the lamp was ON then when push button OFF the servo motor was rotated anticlockwise that mean the auto gate will close also the lamp was OFF. This example can be seen on Figure 4.43, the complete prototype. The webcam will monitor and detect motion and movement in front of house using iSpy software. This project will use software Arduino IDE to create coding before send it to NodeMcu ESP8266. Based on figure below, is the example of coding that include code web server also servo motor and lamp with relay module. The NodeMcu ESP8266 as a microcontroller to receive data from web server and also have WIFI to connected the phone. Besides that the web server as a controller to controlled open or close the auto gate and lamp. PREPARE FOR PRESENTATION FYP 2 presentation will be held next week on Wednesday at Dewan Gemilang. I have prepare 2 ...

Activity: Webcam using iSpy (Experiment 4) First step is to set the camera. Go to Add > IP Camera For set the webcam, go to Local Device and search ID webcam at Video Device. After that, to set the microphone you must click right hand at mouse and choose edit Next, go to toolbar Camera and choose Microphone also add new microphone Finally, all the records were saving VIDEO

Webcam Interfacing With iSPY....How It Work? Configuring Web Access iSpy has it's own webserver built in which allows it to stream your captured content over your local network and out anywhere over the web. The iSpyConnect website is the interface for accessing your iSpy webserver so you'll need to create an account to login. You will need to login through iSpyConnect whether you are accessing iSpy locally over the network or remotely. iSpyConnect restricts access to your iSpy with authentication tokens, preventing people from snooping on your live content and videos. To connect iSpy to web services, click on "Web Settings" on the toolbar menu, enter your login details into the username and Password fields. Next you choose the LAN and WAN ports that iSpy is going to use. The LAN and WAN ports can be any valid port number. If port 8080 is in use by either internal LAN applications or as a visible external port then you can change these here. Next select the...

Activity: Interface Webserver with NodeMcu (Experiment 3) Introduction In this project we are going to build a simple home automation project allows you to control home appliance from anywhere. Webserver is a simple to create button. Hardware required Webpage and NodeMCU is used in this example. Inset NodeMCU to the Webserver as shown in the image ahead then connect NodeMCU to PC or Laptop through USB cable. Connect UCB cable from NodeMcu to PC or Laptop On Webpage You need to perform following steps on Blynk App. Insert the IP address got from serial monitor at Arduino IDE. Insert the IP addresse and set the name project After insert the IP address, the webpage will show the button Button on webpage CODE The experiment was successful !!!!!!!!!!!